LoadFit3D - cargo space planning

14 days of full Premium when you create an account - no card

Load planning software in 3D

A better layout and a safer journey. Place pallets and cargo in trailers, containers and vans, position them with AI, measure distances and check axle loads - before the vehicle sets off.

The LoadFit3D planner: cargo added in the panel, placed with one click, a pallet truck slid under a pallet and the free length measured
Try it free

Premium from 39 PLN net/month with annual billing

  • No install - runs in the browser
  • No card to start
  • Free plan with no time limit
AI
auto-placement and a cargo assistant
Route
unloading order along the way
Checks
measuring and a pallet truck in 3D
LDM
how much of the floor is used
PDF
a report ready for the driver
3D + 2D
two planning views
Auto-placement

Place the whole load with one click

Let the system arrange everything around dimensions, free space and what can be stacked - either with the plain algorithm or the AI-assisted one when the load is more complicated. Press Auto-placement and watch the same cargo arrange itself.

A layout in seconds
Less manual work
Stacking handled for you
Try it free
Cargo space before auto-placement - several pallets do not fit and sit outside the trailer
4 pallets outside the trailer
8 of 12 pallets inside - 5.4 m used
One place to work

What the load planning software does

Everything a good load plan needs, without switching between spreadsheets and sketches. Dimensions, weight, geometry, AI and the saved project all stay in one place.

Nothing to install
Your data saved to the account
New features without interrupting work

Arranging the load

From an empty space to a finished layout.

  • Auto-placement

    Arrange cargo with one click, taking dimensions and stacking into account.

  • AI assistant

    Paste a cargo description from an email or a freight exchange and AI turns it into a ready list.

  • Multi-stop route

    Add stops in route order - auto-placement puts the earlier ones nearer the doors by itself.

  • Several spaces at once

    Plan a few trailers, containers or vans in one project and switch between them.

Checks before departure

Test the plan before the cargo reaches the vehicle.

  • Pallet truck

    See live whether a pallet truck slides under a pallet - it turns red on a collision.

  • Tape measure

    Measure between cargo items and the walls, with points snapping precisely to edges.

  • Balance and axle load

    Watch the centre of gravity and the front and rear axle loads in real time.

The result and the team

What remains once the load is planned.

  • 3D and 2D views

    Judge the space from every side and check the plan from above at any point.

  • PDF report for the driver

    A short, readable report with 3D and 2D views and a preview link - ready to hand over.

  • Shared library and team

    Invite colleagues to the workspace and work on the same vehicles, cargo and projects.

Try the planner
Built for everyday work

How the 3D load planner works, feature by feature

From dimensions to a finished plan in one place. LoadFit3D brings visualisation, AI, calculation and saved data into a single process.

01

Multi-stop route

Add stops in route order and assign cargo to them - Auto-placement and AI auto-placement then put the earlier stops nearer the doors, so unloading on the way does not mean shifting everything else.

Unloading order instead of a random layout
Works with Auto-placement and the AI variant
Premium feature
Unloading order in a trailer - four stops as separate blocks, the first one by the doors
02

AI assistant - from a text description to a finished plan

Paste the cargo description exactly as the customer sent it - from an email, a freight exchange or a messenger. The AI assistant recognises names, dimensions, weight and quantity and adds them straight to the plan.

Reads Polish, English, German, Spanish and French descriptions
Fills in missing data with a note
Works on the free plan too - 10 queries a month
The AI assistant recognising cargo from a pasted text description
03

The pallet truck as a checking tool

Check whether a pallet truck fits under a particular pallet in the finished plan - just slide it in. Yellow by default, red only on a real collision, so you know at once whether the unloading route is safe.

Slides under a pallet with a sideways nudge
Red only on a real collision
Counts towards weight, not volume
A pallet truck slid under a pallet in a LoadFit3D cargo space
04

Tape measure - precise distances in the space

Measure between any two points in the cargo space without reaching for a calculator. Points snap to the edges of cargo and walls, so the measurement is exact every time.

Snapping to edges
Measuring mode blocks accidental moves
Up to 10 measurements in each space
Measuring the distance between cargo items with the tape measure in LoadFit3D
05

Several spaces in one project

Add a few trailers, containers or vans to one project and switch between them. Auto-placement only works on the selected space, so the others stay exactly as they were, and the 2D view shows all of them at once.

Trailers, containers and vans in one project
Auto-placement leaves the other spaces alone
Premium feature
Two cargo spaces in one LoadFit3D project - a trailer and a container
06

Axle loads worked out before departure

The centre of gravity and the front and rear axle loads recalculate as you build the layout. You see an exceeded limit in the plan, not on a weighbridge during an inspection.

Weight balance and axle split, live
A warning when a space or axle limit is exceeded
Detailed axle breakdown - Premium
The weight balance and axle load panel in LoadFit3D
Ready when you need it

A library of vehicles, cargo and projects

Your own vehicles, cargo and projects are saved to the account - available from any device, ready to reuse and shared across the whole team.

Vehicles

Create and save custom trailers, vans and containers.

Cargo

Build your own pallets and ready-made cargo sets.

Projects

Combine saved data into new projects without re-entering parameters.

Team

Invite colleagues to the workspace - they see the same vehicles, cargo and projects at once.

Create a free account
The first page of a LoadFit3D PDF report: a 3D view of the loaded trailer, a legend, side and rear views, and the use of floor, volume, weight and LDM
The result of step 04 - the report the driver receives.
From data to a decision

How to plan a load, step by step

Four steps from an empty trailer to a finished plan - less guesswork at the ramp.

01

Pick the space

Use ready-made trailers and containers, or one of your own saved spaces.

02

Add the cargo

Enter dimensions by hand, import a CSV, or paste a description for the AI assistant.

03

Arrange and verify

Use auto-placement (plain or AI), measure distances and watch the axle balance.

04

Save and share

Keep the plan on your account, generate a PDF report and share a link with the team.

Try it free
Multi-stop route

Unload without shifting everything

Assign cargo to stops in route order and auto-placement arranges it so the first drop stands by the doors. Without that, goods for the last stop can block the first one.

Without an order: 6 pallets to move at the first stop
With an order: nothing to shift along the way
The same cargo takes up the same metres
Try it free
Cargo arranged without stop order - the first stop's pallets stand by the cab, blocked in by the rest
First stop by the cab
6 pallets to move
Who it is for

Who plans loads in LoadFit3D

LoadFit3D is load planning software for trailers, containers, vans and other cargo spaces. Instead of counting pallets in a spreadsheet and sketching the layout on paper, you arrange the cargo in a 3D view, check the use of floor, volume, LDM and weight, and hand the finished plan to the driver as a PDF report or a preview link.

Freight forwarders and hauliers

Check that a job fits in the trailer before you accept it - and show the customer the layout instead of describing it.

Warehouses and dispatch teams

Prepare the loading plan before the vehicle arrives, so the crew at the ramp knows what to load and in what order.

Manufacturers and exporters

Work out how much really fits in a container or trailer, and base your freight quote on actual LDM figures.

Drivers and dispatchers

Receive a finished PDF report or a plan link - with 3D and 2D views, unloading order and stacking marked.

How is this different from a spreadsheet?

A spreadsheet will add up metres and kilograms, but it will not show whether the cargo physically fits, whether a pallet truck gets under a pallet, or in what order to unload on a route with several stops. LoadFit3D checks geometry, collisions and unloading order, and the result can go straight to the customer or the driver.

Load calculator

How many pallets fit in a trailer?

A standard 13.6 m trailer usually takes 33 euro pallets lengthways or 34 crossways - but the real number depends on cargo height, whether it can be stacked and the permitted weight. Check your own case instead of trusting a table.

Stacking
34items

34 × Euro pallet at 100 cm high in a Standard trailer.

LDM
13.6
of 13.6 m
Floor
98%
32.6 m²
Weight
3.4 t
of 24 t
Build it in the planner
← front / cabtop viewdoors →

The result comes from the same placement algorithm the planner uses - not an estimate from a table, but a real layout for the dimensions given. In the app you can add your own vehicle dimensions, several cargo types at once and axle load checks.

Before you start

Worth knowing before your first plan

Runs in the browser

No install and no plugins. Chrome, Firefox, Safari or Edge - on the office computer and on a tablet at the ramp.

Your data stays yours

Projects, vehicles and cargo belong to your account and your company workspace. We do not sell or share cargo data.

A free plan that does not expire

Create an account and plan without giving a card. Premium comes later, when you plan regularly.

A Polish company with real support

P.P.H.U. „KAMKAZ” S.K.A. of Łódź, VAT ID PL9472007422. An interface in English, Polish, German, Spanish and French, and replies from a person.

LoadFit3D pricing

Start free. Move to Premium when you plan regularly.

Premium pricing depends on the number of seats. Paying yearly brings the monthly rate down.

Every new account gets 14 days of full Premium - no card and no commitment.

Seats
1 seat
Free

Free

3D and 2D planning with no cap on pieces, plus measuring, the pallet truck and PDF reports.

0 PLNno time limit

The first 14 days after you create an account run on full Premium - once per person. After that the account moves to the free plan, with no card and no time limit.

  • Load planning in 3D and 2D with no cap on items per plan
  • Auto-placement and manual rotation in 90/180 degree steps
  • Tape measure, pallet truck and axle load warnings
  • AI assistant - 10 queries a month, without an account too
  • Cargo import from a CSV file, without an account
  • PDF reports with a watermark, no cap on how many
  • With an account: 3 saved projects and 5 library items
Most popular

Premium

For teams that plan regularly. The price covers one seat.

39 PLNnet / month with annual billing

You save 120 PLN net a year against paying monthly. VAT and the amount due appear at the last step.

No cap on spaces or projects - including where other tools at this price still count them.

  • Every vehicle template, including 20′ and 40′ containers, mega and road trains
  • Custom space dimensions and multi-space planning with no cap
  • Multi-stop routes - unload on the way without taking the trailer apart
  • No cap on saved projects, vehicles and cargo
  • PDF reports without a watermark, carrying your company logo and name
  • AI auto-placement and AI assistant - 20 queries a day per seat
  • Detailed axle load breakdown, cargo rotation with the scroll wheel, and teamwork across seats
Tailored

Custom

For companies that need integrations, onboarding and LoadFit3D fitted to their own processes.

On requestquote

For fleets and teams that need more than 10 seats. We prepare the quote after a short conversation about how you load.

  • Everything in Premium, with no cap on seats
  • API integrations with TMS, WMS or ERP systems
  • Onboarding around your process and team training
  • Bespoke vehicle templates and loading rules
  • Priority support and a say in what gets built next
  • A contract, an SLA and invoicing on your company's terms

Amounts are net and cover the whole workspace rather than one person - the more seats, the less per person. Every payment is invoiced; for a company purchase, give us your VAT ID.

You can switch automatic renewal off in the panel at any time - Premium then runs to the end of the period you have already paid for, and the workspace returns to the free plan. Saved projects stay.

Common questions

Frequently asked questions about load planning

Short answers to what people ask most. The full list, together with the step-by-step guide, is on the FAQ and help page.

No. Every new account gets 14 days of the full Premium plan once the email address is confirmed - no card details and no commitment. The trial is one per person and is tied to the email address: deleting the account and signing up again does not renew it. After that the account moves to the Free plan by itself - nothing is charged, and saved projects stay on the account and remain readable even when there are more of them than the Free plan holds.

Yes, LoadFit3D has a Free plan that lets you create an account and plan a load without paying. The Premium plan unlocks AI auto-placement (20 queries a day per seat), multi-stop routes, multi-space planning, balance and axle load checks, and teamwork. The current scope and prices of both plans are on the pricing page.

No - the planner works without registering and has the same limits as the Free plan, with no cap on cargo items or PDF reports. An account is needed to save projects, vehicles and cargo, and once the email address is confirmed it gives you 14 days of the full Premium plan - without card details.

Yes, cargo can be imported from a file, or you can paste a text description - from an email or a freight exchange, for example - into the AI assistant, which turns it into a ready list of items with dimensions and quantities.

Yes, any saved project can be shared with a preview link - somebody outside the company, a driver or a customer, sees the plan without creating an account.

No - Premium works at the level of a company workspace with a set number of seats. The owner or an admin invites colleagues by email within the available seats, and everyone works on shared vehicles, cargo and projects.

LoadFit3D runs in a web browser with nothing to install - you need a current version of Chrome, Firefox, Safari or Edge, and an internet connection.

A better planned day

Plan the next load with less stress.

Open the planner and build your first load - no install and no card.

Try it free