Home

Help

FAQ and help - how LoadFit3D works

What LoadFit3D is, what it does and how to plan your first load in a few steps - with answers to the most common questions below.

What LoadFit3D is

LoadFit3D is a web application for planning loads in trailers, containers and other cargo spaces, in 3D and 2D. You arrange pallets and custom cargo, check floor and volume use, LDM, weight and axle loads, and finish by generating a PDF report for the driver or sharing a link to the plan. It is used by freight forwarders, hauliers and warehouses planning a load before dispatch.

Application address: https://load-fit.com. The planner runs at https://load-fit.com/planner.

What LoadFit3D can do

Auto-placement, with or without AI

Arranges the cargo you have added in one click, taking dimensions, free space and stacking into account - either with the plain algorithm or with the AI-assisted variant for more complex, mixed loads.

Multi-stop routes

A Premium feature: add stops in route order and assign cargo to them, and auto-placement puts the earlier stops nearer the doors by itself.

The pallet truck as a check

See whether a pallet truck fits under a particular pallet in a finished plan - yellow by default, red only on a real collision.

Tape measure

Measure distances between items of cargo and from the walls of the space, snapping to edges - measurements are saved with the plan.

AI assistant

Paste a cargo description from an email or a freight exchange and the AI turns it into a ready list of items with dimensions and quantities.

Balance and axle loads

Watch the centre of gravity and the load on the front and rear axles in real time (Premium).

A PDF report for the driver

A short, readable report with 3D and 2D views, a colour legend and a link to the plan - ready to hand to the driver.

3D and 2D views

Judge the space from every side and check the plan from above at any point in your work.

Several spaces at once

Plan a number of trailers, containers or vans in one project and switch between them (Premium).

A shared library and your team

Invite colleagues into the workspace and work on the same vehicles, cargo and projects (Premium).

How to start - step by step

1

Create an account - or open the planner straight away without registering, with auto-placement, the tape measure, the pallet truck and watermarked PDF reports, and no cap on pieces - and pick or add a vehicle or cargo space with its dimensions.

2

Add cargo: by hand with dimensions, from a file, or by pasting a text description into the AI assistant, which works out the dimensions and quantities itself.

3

Click auto-placement (plain or the AI variant) to arrange everything automatically - or move, rotate and stack the cargo by hand.

4

Check floor and volume use, LDM, weight and - on Premium - balance and axle loads.

5

Generate the PDF report for the driver, or share a link to the plan with someone outside your company.

Frequently asked questions

No. Every new account gets 14 days of the full Premium plan once the email address is confirmed - no card details and no commitment. The trial is one per person and is tied to the email address: deleting the account and signing up again does not renew it. After that the account moves to the Free plan by itself - nothing is charged, and saved projects stay on the account and remain readable even when there are more of them than the Free plan holds.

Yes, LoadFit3D has a Free plan that lets you create an account and plan a load without paying. The Premium plan unlocks AI auto-placement (20 queries a day per seat), multi-stop routes, multi-space planning, balance and axle load checks, and teamwork. The current scope and prices of both plans are on the pricing page.

No - the planner works without registering and has the same limits as the Free plan, with no cap on cargo items or PDF reports. An account is needed to save projects, vehicles and cargo, and once the email address is confirmed it gives you 14 days of the full Premium plan - without card details.

Auto-placement is an algorithm that arranges the cargo you have added, taking dimensions, free space and stacking into account. AI auto-placement additionally uses an AI model to choose the order and priorities better when the cargo is more complex and varied.

It is a Premium feature that lets you define stops in route order and assign specific cargo to them. Auto-placement and AI auto-placement then put cargo for the earlier stops nearer the doors, so unloading along the way does not mean shifting the rest of the load.

The pallet truck in LoadFit3D is a checking tool, not cargo - you use it to see whether a real pallet truck fits under a particular pallet in the finished plan. It is yellow by default and turns red only when it genuinely collides with another pallet, so you know at once whether the unloading route is safe. It counts towards the weight of the space, but not its volume.

The tape measure lets you measure the distance between any two points in the cargo space - points snap to the edges of cargo and walls, so the measurement is exact. Measurements are saved with the plan and stay visible after you leave measuring mode. One space can hold up to 10 measurements, in every plan and with no monthly limit.

Yes, cargo can be imported from a file, or you can paste a text description - from an email or a freight exchange, for example - into the AI assistant, which turns it into a ready list of items with dimensions and quantities.

Yes, the Premium feature "multi-space planning" lets you add several cargo spaces to one project and switch between them, planning each separately.

It is a short, practical report ready for the driver: a main 3D view with a colour legend for the cargo, extra views from several angles, a readable 2D top view showing stacking, and a link to the online preview of the project.

Yes, any saved project can be shared with a preview link - somebody outside the company, a driver or a customer, sees the plan without creating an account.

No - Premium works at the level of a company workspace with a set number of seats. The owner or an admin invites colleagues by email within the available seats, and everyone works on shared vehicles, cargo and projects.

LoadFit3D runs in a web browser with nothing to install - you need a current version of Chrome, Firefox, Safari or Edge, and an internet connection.